Strainer PN 16 Y-type, with flanged ends and drain-plug 1/2” in cover
Materials: |
Body: nodular cast iron JS 1030, Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301), Gasket: graphit reinforced |
Connection: |
flanged ends DIN |
Test pressure: |
24 bar |
Specials: |
with connection for differential gauge in body DN 15 - DN 40 G 1/4" and DN 50 - DN 250 G 1/2" |
DN | L | A | Mesh-width* | Weight (kg) | Article No.** |
---|---|---|---|---|---|
65 | 290 | 140 | 0,75 | 9,60 | 96906516GLT |
100 | 350 | 220 | 1,20 | 22,00 | 96910016GLT |
125 | 400 | 260 | 1,20 | 34,00 | 96912516GLT |
150 | 480 | 300 | 1,20 | 48,50 | 96915016GLT |
200 | 600 | 360 | 1,20 | 111,00 | 96920016GLT |
250 | 730 | 550 | 1,20 | 220,00 | 96925016GLT |
300 | 850 | 610 | 1,20 | 272,00 | 96930016GLT |
* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"
DN | L1 | D1 | Fo | KVS1 | KVS2 | Zet1 | Zet2 | ø G | ø R | P | D | B |
---|---|---|---|---|---|---|---|---|---|---|---|---|
65 | 123 | 73 | 38 % | 119,50 | 105,40 | 2,00 | 2,57 | 94 | 83 | 1,0 | 111x111 | 220 |
100 | 184 | 108 | 36 % | 217,50 | 196,70 | 3,38 | 4,14 | 134 | 120 | 1,0 | Ø 194 | 340 |
125 | 219 | 135 | 36 % | 364,40 | 320,00 | 2,94 | 3,81 | 158 | 138 | 1,5 | Ø 234 | 410 |
150 | 258,5 | 160 | 36 % | 537,00 | 468,00 | 2,81 | 3,70 | 180 | 162 | 1,5 | Ø 264 | 475 |
200 | 360 | 208 | 36 % | 820,00 | 769,00 | 3,81 | 4,33 | 240 | 209 | 2,0 | Ø 290 | 580 |
250 | 336 | 231 | 35 % | 1260,00 | 1108,00 | 3,94 | 5,09 | 319 | 275 | 2,0 | Ø 345 | 830 |
300 | 386 | 281,5 | 35 % | 1735,00 | 1520,00 | 4,31 | 5,61 | 379 | 320 | 2,0 | Ø 401 | 950 |
The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.
Key for our datasheets
DN | Nominal diameter |
L | Face to face dimension (mm) |
A | Centre line of pipe to end of cover (mm) |
L1 | Screen length (mm) |
D1 | Screen diameter (mm) |
Fo | Free screen area standard element (mm) |
KVS1 | KVS-Value standardscreen (m3/h) |
KVS2 | KVS-Value fine screen (m3/h) |
Zet1 | Zeta-Value standardscreen |
Zet2 | Zeta-Value fine screen |
ø G | Outer-diameter coverflange gasket (mm) |
ø R | Inner-diameter coverflange gasket (mm) |
P | Thickness coverflange gasket (mm) |
D | Coverflange size |
B | Distance required to remove screen (mm) |