Strainer PN 25 Y-type, with flanged ends and drain-plug 1/2” in cover
Materials: |
Body: cast steel GP 240GH, Screen: stainless steel 1.4301, Gasket: graphit reinforced |
Connection: |
flanged ends DIN |
Test pressure: |
60 bar |
Specials: |
with connection for differential gauge in body DN 15 - DN 40 G 1/4" and DN 50 - DN 250 G 1/2" |
DN | L | A | Mesh-width* | Weight (kg) | Article No.** |
---|---|---|---|---|---|
200 | 600 | 360 | 1,32 | 153,00 | 20325200GLT |
* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"
DN | L1 | D1 | Fo | KVS1 | KVS2 | Zet1 | Zet2 | ø G | ø R | P | D | B |
---|---|---|---|---|---|---|---|---|---|---|---|---|
200 | 290 | 186 | 36 % | 675,00 | 570,00 | 5,50 | 7,60 | 260 | 212 | 2,0 | Ø 345 | 720 |
The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.
Key for our datasheets
DN | Nominal diameter |
L | Face to face dimension (mm) |
A | Centre line of pipe to end of cover (mm) |
L1 | Screen length (mm) |
D1 | Screen diameter (mm) |
Fo | Free screen area standard element (mm) |
KVS1 | KVS-Value standardscreen (m3/h) |
KVS2 | KVS-Value fine screen (m3/h) |
Zet1 | Zeta-Value standardscreen |
Zet2 | Zeta-Value fine screen |
ø G | Outer-diameter coverflange gasket (mm) |
ø R | Inner-diameter coverflange gasket (mm) |
P | Thickness coverflange gasket (mm) |
D | Coverflange size |
B | Distance required to remove screen (mm) |