Strainer PN 10 Y-type, with flanged ends and drain-plug 1/2”BSP in cover
Materials: |
Body: cast iron JL 1040, Screen: stainless steel 1.4301 (from DN 150 perforated plate 1.4301), Gasket: graphit reinforced |
Connection: |
flanged ends DIN |
Test pressure: |
15 bar |
Specials: |
Epoxy paint (wet)inside + outsideRAL 5005 , 100-150 microns. Valves made of cast iron are not authorized for use in systems subject TRD110. |
DN | L | A | Mesh-width* | Weight (kg) | Article No.** |
---|---|---|---|---|---|
200 | 600 | 360 | 1,20 | 99,50 | 9601020002 |
250 | 730 | 550 | 1,20 | 162,00 | 9601025002 |
300 | 850 | 610 | 1,20 | 280,00 | 9601030002 |
* Fine screens at all nominal diameters mesh width 0,25 mm, free area 37%
** When ordering with fine screen: Article-Nr. + addition "with F-SIEB"
DN | L1 | D1 | Fo | KVS1 | KVS2 | Zet1 | Zet2 | ø G | ø R | P | D | B |
---|---|---|---|---|---|---|---|---|---|---|---|---|
200 | 359 | 208 | 36 % | 820,00 | 769,00 | 3,81 | 4,33 | 240 | 209 | 2,0 | Ø 290 | 580 |
250 | 336 | 231 | 35 % | 1260,00 | 1108,00 | 3,94 | 5,09 | 319 | 275 | 2,0 | Ø 345 | 830 |
300 | 386 | 281,5 | 35 % | 1735,00 | 1520,00 | 4,31 | 5,61 | 379 | 320 | 2,0 | Ø 401 | 950 |
The delivery of the strainer is in accordance to PED 2014/68/EU Point 11 and 12 of the preamble and article 1, clause c as well as article 4, clause 3.
The picture shown is only a symbolic photo! Subject to technical changes and errors.
Key for our datasheets
DN | Nominal diameter |
L | Face to face dimension (mm) |
A | Centre line of pipe to end of cover (mm) |
L1 | Screen length (mm) |
D1 | Screen diameter (mm) |
Fo | Free screen area standard element (mm) |
KVS1 | KVS-Value standardscreen (m3/h) |
KVS2 | KVS-Value fine screen (m3/h) |
Zet1 | Zeta-Value standardscreen |
Zet2 | Zeta-Value fine screen |
ø G | Outer-diameter coverflange gasket (mm) |
ø R | Inner-diameter coverflange gasket (mm) |
P | Thickness coverflange gasket (mm) |
D | Coverflange size |
B | Distance required to remove screen (mm) |